You may also like:
The SAVIOR7™ PRO Combat Trauma System is a low profile assault-aid trauma bag designed for operational and tactical medics working in confined spaces, specifically designed to provide immediate access to critical care supplies and deliver life sustaining treatments while providing ballistic protection for the user.
Depending on mission requirements, the SAVIOR7™ PRO can be configured in a variety of ways to support your team. The full length zippered main interior padded pocket is completely lined with loop tape and can accommodate multiple configurations of G7 MINIFILL and H7 VIEWPACK removable modules, or a variety of commercially available system panels. The quick-grab G7 MINIFILL and H7 VIEWPACK labeled mods support critical intervention supplies that can be accessed or deployed for trauma treatments. The front and back exterior zippered pockets accommodate litters or up to 12” M4L ballistic armor. A bottom zippered pocket offers additional storage for triage supplies, litters, or IV solutions. The pack exterior is fully paneled with laser cut MOLLE for additional equipment. Low profile carry-drag handles are located on the top and sides for versatile recovery. Equipped with concealable waist and backpack straps, the SAVIOR7™ PRO can be readily worn as a solid rucksack or all straps can be stowed cleanly and the pack can be attached to body armor or a load bearing vest using the included 4 point webbing straps. If attached to a vest the SAVIOR7™can quickly be removed for treatment by triggering the shoulder release buckles. A large front name tape area offers space for easy identification or GLINT tape. Constructed from 1200 denier coated TPE water and stain resistant material, with all YKK oversized zippers, the SAVIOR7™ is built tough and backed by our M4L Lifetime Warranty.
The SAVIOR7 TEMS is available fully loaded for tactical EMS. The kit includes 5 labeled modules with the following supplies: BLEEDING Module: 2 Orange NAR Combat Application Tourniquet, 1 SWAT-T Tourniquet, Orange, 1 20x20 BLAST Bandage, 2 Emergency 4" Trauma Dressings, 4 NAR Compressed Gauze, and 1 Hyfin Vent Chest Seal Twin Pack. WOUNDS Module:1 x 3 Fabric Adhesive Bandage, 10 2 x 4 Oval Pads, 10 2 Packs of 4" x 4" Gauze Sponges, 4 Rolls of Conforming Gauze, 2 3/4" 4" x 4 3M Tegaderm Transparent Film Dressings, 5 3 Packs of 1/4 x 3" Wound Closure Strips, 3 ampules of Tincture of Benzoin, 2 2" x 10 yds Cloth Tape, 1 15gm Lemon Glutose, 1 4 oz. Eyewash, 1 Wound Prep Module, 1 Medications Module, 1 1.5oz Hand Sanitizer.
AIRWAY Module: 2 Rusch® Latex-Free Robertazzi 28Fr Naso Airways w/ Lube, 1 Berman Oral Airway Set, 1 Pocket BVM Resuscitator. ORTHO Module: 2 Flat Orange/Blue 36 SAM Splints, 4 Triangular Bandages with pins. BURNS Module: 2 4 x 4 Water-Jel Burn Dressings, 1 4 x 16 Water-Jel Burn Dressing, 2 5 x 6 Disposable Cold Compresses, 2 4” Elastic Bandages w/ Velcro Closures
The SAVIOR7™ PRO Combat Trauma System is available in tactical black or coyote tan, complete with ultrathin NIJ Level IIIA armor protection, three G7 MINIFILL, and two H7 VIEWPACK modules for maximum utilization, or items can be purchased individually. Fully stocked systems with critical care supplies are also available by contacting us. The SAVIOR7™ PRO is available in tactical black (no reflectivity).
**MODULES ARE NOT LABELED AS SHOWN, they ship to you blank for customization**
• Oversized YKK zippers
• Provides 12” (tall) x 10” (wide) NIJ Level IIIA armor protection
• Backpack system with contoured yoke harness system easily distributes weight for maximum comfort
• Black matte finish metal hardware
• Fully concealable waist and backpack straps when not in use
• Double stitching on all stress points
• 4 point strap system attaches to vests, quick release buckles
• 3” x 12” front name tape area, MERET tape included
• Fully paneled with laser cut MOLLE to support a TS2 Ready™ module or any MOLLE compatible gear
• Low profile carry-drag handles on top/ sides
• Adjustable sternum and waist belt
• Large EZ-Pull pullers allow easy access
• Main pocket opens complete
• Loop tape lined main pocket attaches a variety of modules
• Incredibly durable 1200 Denier coated TPE, water and stain resistant
• Front/ back zippered pockets for litters/ armor protection
• Bottom pocket for litters/ IV solutions
• Drain hole bottom
• M4L ballistic resistance
NIJ STANDARD 0108.01 THREAT PROTECTION (LEVEL IIIA)
9mm Luger 124gr FMJ
.44 MAG 240gr Lead SWC GC
SPECIAL THREAT PROTECTION
Federal 9mm Luger 124gr Hydra-Shok JHP
Federal .40 S&W 165gr Hydra-Shok JHP
Federal .45 AUTO +P 200gr GDHP
Product Dimensions: 21.5” x 13.5” x 4.75”(outer dimensions), 15” x 12” x 4”(inside main pocket)
Product Weight: 4 lbs, 8 oz standard, 5 lbs 8 oz w/ M4L Armor, 15 lbs TEMS FULLY LOADED
M4L Lifetime Warranty on SAVIOR7, 5 Year Warranty M4L Armored Ballistic Panel
Posted by Clorenz
The SAVIOR7™ PRO pack is a well-designed pack which is at home in urban as it is in rural deployments. It would be a great bag for industrial response too. The pack is well set up in an open concept which allows the user to manipulate its contents either with MERET’s own bags or ones of your choosing. The profile is slim which does force you to make some inventory decisions but that is not always a bad thing. The tradeoff is how much your back will thank you after sitting for hours in the armor. I found the construction to be very well made. The stitching has proven to be very tough as are the zippers. The straps are comfortable. The lower compartment is really a nice feature, it definitely adds versatility and rapid deployment of essential items. If I nitpick the only negative I have found in the few months using this bag is the buckles on the straps release very easily. It hasn’t proven to be a major issue. I have been operating out of this for several months and am extremely pleased with it. As soon as I recover from an injury and the surgery I will put more miles on it and I am positive it will do well.
Administrative follow up:
Thank you for the feedback. We're happy to hear it's working well. We're working to improve the webbing/ buckle connections based on your comment.